Gulf Island Sails - Your source for quality sailboats in Southwest Florida Gulf Island Sails
25096 Marion Ave.
Punta Gorda, Florida 33950
Tel (941) 639-2320
Fax (941) 833-0098
Toll-free (866) 375-6554
Com-Pac 27/3 Sailboat

The Com-Pac 27/3

The Classic Pocket Cruiser from Com-Pac

The Com-Pac 27 Mark III is built in the traditional Hutchins style. She is fast, tracks straight, maneuvers tightly, and accelerates easily. Her balanced ends offer agile performance even in light air. She turns within her own length and motors as well as she sails. The Com-Pac 27/3's interior allows standing head room, six berths and an enclosed head with optional hot water shower.

A full galley, hanging locker and storage space help to satisfy the needs of a cruising family. See the slideshow and call us for more information on these fine yachts.

Com-Pac 27/3 Specifications
From Com-Pac Yachts

Designed by: Robert K. Johnson, NA

Dimensions and Weights

Mast Height Above Water: 35'8"
Displacement:6000 lbs
Ballast:2500 lbs

Sail, Rigging and Hull

Sail Area:380 sq ft

Systems and Amenities

Power:Yanmar 3 cyl fresh water cooled diesel
Fuel Capacity:13 gallons
Water Capacity:55 gallons, plus 6 gallon hot water tank
Holding Tank Capacity:14 gallon
Cabin Headroom:6'1"
Berths:Sleeps 6
Head:Marine Head/Enclosed

Pricing and Options

Boat Base Price:$117,995
Custom Hull Color:
Awl-Grip - selected colors
Fabric Interior Cushions:
In Lieu of vinyl. Select Sunbrella fabrics.
20 amp 3 bank Battery Charger$582
155% Roller Furling Genoa:
In lieu of 135%
Genoa sheets$86
Cruising Spinnaker:
Standard colors
Mack Pack sailcover laxy jack system$1,550
Sail Cover:
Selected colors
Pedestal cover:
Selected colors
Hatch Screen:
12" x 17"
Teak Cockpit Grate$799
Emergency tiller$395
Mid-hull Rubrail:
With stainless steel striker
Epoxy Anti-Fouling Paint$1,674
LPG Stove:
100% safety, gimbaled, regulator, solenoid with panel
Microwave Oven:
110 volt
Bimini Top:
Stainless frame, 9.5 oz acrylic - selected colors

Call for price.
Stainless frame, 9.5 oz acrylic - selected colors

Call for price.
Cockpit Cushions:
2" PVC foam - selected colors
Autohelm EV 100 wheel pilot
Adler Barbour Cold Machine$3,144

Hull and Deck

Hand-laminated Tri- and Bi-axial knitted fiberglass hull with vinyl ester resin gelcoat.

Shoal draft, high lift, low drag keel molded in to hull.

Sea hood with two Dorade vents and Dorade guard.

Foil shaped, semi-balanced spade rudder.

Heavy duty rigid rubrail with stainless steel striker plate.

Stainless steel bowsprit with built-in anchor roller.

Stainless steel double bow and stern rails. Double lifelines with side gates.

Stainless steel transom boarding ladder.

8 stainless opening ports with screens

2 overhead Lexan hatches

Spars, Sails & Rigging

Stainless steel chainplates mounted on hull.

Mainsail and 135% roller-furling Genoa.

Mid-boom mainsail sheeting with mainsheet traveler on cabin top.

Single line reefing - one set of reef points.

2 Harken 32.2 STC self tailing jib sheet winches with handle.

2 Harken 16 STC self tailing winches for halyards, reefing, and mainsheet.

All halyards, sheets, reef lines led to cockpit.


Large cockpit with two seat hatches.

Molded in wet storage locker with helmsman seat hatch cover

Edson CD-I geared, drag-link steering system

Edson 32" Destroyer Wheel w/Brake

Edson side-mounted, single-lever engine controls

Pedestal mounted compass

Deluxe instrument panel with tachometer


"L" shaped galley

Stainless sink

2 burner Origo alcohol stove


Dinette with drop leaf table

Large table-back dinnerware storage

Teak and holly sole

4" high density foam cushions

3 cabins: V-berth with sliding door, main salon, and enclosed head.

Dinette converts to double berth, settee converts to two pilot berths.

Hanging locker and bank of drawers in V-berth.

Electrical System

Master AC and DC electrical panels

30 amp shore power, multiple outlets, 50' cord

2 AGM Batteries

12 volt cabin lights

Pressure water


Aft head with hot shower

Teak head grate

Stainless sink

Engine Room

Insulated engine room

Raw water strainer

Racor water separating fuel filter

Engine room light

6 gal water heater with engine heat exchange and 110 volt operation

Flotation & Safety

US Coast Guard approved navigation lights

Masthead anchor light

Midmast steaming light

Manual and automatic electric bilge pumps

Other Features

All exterior wood, drip moldings, handrails, companionway hatch dropboards, hatch slides, and coaming caps are teak wood.

Contact us about this boat

Manufactured by Com-Pac Yachts

Prices do not include freight, dealer prep, or sales tax if applicable.